October 2009 Archives by thread
Starting: Thu Oct 1 01:41:09 MDT 2009
Ending: Sat Oct 31 22:25:32 MDT 2009
Messages: 1144
- [pianotech] Essex EUP-123 keytop?
wimblees at aol.com
- [pianotech] missing piano: was Re: pianotech Digest, Vol 11, Issue 242
wimblees at aol.com
- [pianotech] Avoiding Clients
James Grebe
- [pianotech] (no subject)
Marshall Gisondi
- [pianotech] Pin height
Richard
- [pianotech] Avoiding Clients
David Skolnik
- [pianotech] Dryburgh Adhesives
Michael Spreeman
- [pianotech] Pin height
PAULREVENKOJONES at aol.com
- [pianotech] Pin height
Jon Page
- [pianotech] Warranties
David Love
- [pianotech] Repair of 1961 Baldwin L Music Desk
Paul Milesi
- [pianotech] Warranties
Israel Stein
- [pianotech] Somewhat OT... metals recycling
Andrew Remillard
- [pianotech] Broken Tuning Pin
barbara at pitchperfectpianos.com
- [pianotech] Warranties
Israel Stein
- [pianotech] Re. Metals recycling
Joseph Garrett
- [pianotech] Pin height
Jon Page
- [pianotech] Broken Tuning Pin
Jon Page
- [pianotech] Pin height
David Ilvedson
- [pianotech] pianotech Digest, Vol 12, Issue 11
Israel Stein
- [pianotech] The End of Piano Making in Britain
david at piano.plus.com
- [pianotech] pianotech Digest, Vol 12, Issue 11
Jon Page
- [pianotech] OT - Tune-a-Piano Sandwiches
Avery Todd
- [pianotech] Tuning pin height
Israel Stein
- [pianotech] OT - Tune-a-Piano Sandwiches (Avery Todd)
Larry Fisher RPT
- [pianotech] O.T.(pianotech] Re. Metals recycling
Joseph Garrett
- [pianotech] Tuning pin height
J. Stanley Ryberg
- [pianotech] Tuning pin height
J. Stanley Ryberg
- [pianotech] The End of Piano Making in Britain
david at piano.plus.com
- [pianotech] Warranties
Israel Stein
- [pianotech] Tuning pin height
nature.dude
- [pianotech] Warranties
David Ilvedson
- [pianotech] Tuning pin height
David Ilvedson
- [pianotech] FW: Re: string measuring tool
David Ilvedson
- [pianotech] D5 damper problem on a Wurlitzer grand (1962)
Qshooterq at aol.com
- [pianotech] completely OT: help needed from English native speaker
Gregor _
- [pianotech] Aligned Beckets
Joseph Garrett
- [pianotech] Stringing Tool
William Monroe
- [pianotech] Stringing Tool
PAULREVENKOJONES at aol.com
- [pianotech] nose bolt cap nuts
William Monroe
- [pianotech] Young Chang & Weber Grands: Action Clicking/Knocking Upon Quick Key Release
Paul Milesi
- [pianotech] Young Chang & Weber Grands: Action Clicking/KnockingUpon Quick Key Release
pmc033 at earthlink.net
- [pianotech] SAY WHAT !!!!
Brian Doepke
- [pianotech] SOT
James Grebe
- [pianotech] Aligned Beckets
Joseph Garrett
- [pianotech] Photo of a S.O.T. (Sanderson ) Sight-O-Tuner
Joseph Garrett
- [pianotech] Sight-O-Tuner picture
pianofritz50 at aol.com
- [pianotech] Piano Disc Pedal Adaptor for the handicapped pianist
Michiel van Loon
- [pianotech] Avoiding Clients
pianolover 88
- [pianotech] Huh???
Joseph Garrett
- [pianotech] tool cases and ...
Marshall Gisondi
- [pianotech] pianotech Digest, Vol 12, Issue 45
Marshall Gisondi
- [pianotech] Huh???
Jon Page
- [pianotech] Piano Equipment for Sale
Teresa Case
- [pianotech] Bridge repair
Richard
- [pianotech] O.T. Huh?
Joseph Garrett
- [pianotech] pianotech Digest, Vol 12, Issue 47
Marshall Gisondi
- [pianotech] Pin height
Israel Stein
- [pianotech] Tuning pin height
Israel Stein
- [pianotech] Tuning pin height
Israel Stein
- [pianotech] Re; Bridge Repair...Should be Bridge Mess!
Joseph Garrett
- [pianotech] Sustaini Pedal Adaptor
Larry Fisher RPT
- [pianotech] Piano Disc Pedal Adaptor for the handicapped pianist
Michiel van Loon
- [pianotech] Bridge repair
ljinno at googlemail.com
- [pianotech] Handicap pedal
tcc440 at netscape.net
- [pianotech] picture
Marshall Gisondi
- [pianotech] Tuning pin height
Al Guecia/AlliedPianoCraft
- [pianotech] Tuning pin height
Israel Stein
- [pianotech] Stringing Tool
Al Guecia/AlliedPianoCraft
- [pianotech] pianotech Digest, Vol 12, Issue 54
Israel Stein
- [pianotech] pianotech Digest, Vol 12, Issue 54
Al Guecia/AlliedPianoCraft
- [pianotech] Tuning pin height
David Ilvedson
- [pianotech] Tuning pin height
Jon Page
- [pianotech] Becket Alignment - sub-topic of Tuning pin height
Israel Stein
- [pianotech] dolly with altitude
Ron Nossaman
- [pianotech] Petrof address
Ayerspiano at aol.com
- [pianotech] Becket Alignment - sub-topic of Tuning pin height
Israel Stein
- [pianotech] Becket Alignment - sub-topic of Tuning pin height
David Ilvedson
- [pianotech] Correct Beckett Alignment
Bill Thompson
- [pianotech] Becket Alignment - sub-topic of Tuning pin height
Jon Page
- [pianotech] Pin-Tite
nature.dude
- [pianotech] Pin-Tite
David Ilvedson
- [pianotech] Bridge repair
Jon Page
- [pianotech] Correct Beckett Alignment
David Ilvedson
- [pianotech] Epoxy for pinblock
Pierre Pouliot
- [pianotech] tool cases and ...
Qshooterq at aol.com
- [pianotech] Some rebuilding videos
Gregor _
- [pianotech] Bridge repair
Conrad Hoffsommer
- [pianotech] "Natural felt" hammers from Brooks
Mark Potter
- [pianotech] Petrof address Thank You
Ayerspiano at aol.com
- [pianotech] NuckLJac
KeyKat88 at aol.com
- [pianotech] "Natural felt" hammers from Brooks
KeyKat88 at aol.com
- [pianotech] pick-a-little-talk-a-little
Dempsey Jr., Paul E
- [pianotech] Epoxy for pinblock
Al Guecia/AlliedPianoCraft
- [pianotech] pianotech Digest, Vol 12, Issue 54
David Ilvedson
- [pianotech] Epoxy for pinblock
David Ilvedson
- [pianotech] pianotech Digest, Vol 12, Issue 73
Israel Stein
- [pianotech] pianotech Digest, Vol 12, Issue 73
David Ilvedson
- [pianotech] Beckets and seeing the wire coming out the other side
David Ilvedson
- [pianotech] pick-a-little-talk-a-little
Al Guecia/AlliedPianoCraft
- [pianotech] Standard Tuning Prices
Gerald Groot
- [pianotech] pick-a-little-talk-a-little
PAULREVENKOJONES at aol.com
- [pianotech] origin of Becket was Re: pick-a-little-talk-a-little
PAULREVENKOJONES at aol.com
- [pianotech] Scheduling
Matthew Todd
- [pianotech] errata
Ron Nossaman
- [pianotech] Decal
Brian Doepke
- [pianotech] Steinway Parts (used)
Dorothy & John Bowen
- [pianotech] Tooth crown pinblock
Zeno Wood
- [pianotech] Steinway Parts (used)
Jlmatt at aol.com
- [pianotech] Interesting upright jack
Scott Helms, RPT
- [pianotech] Coils (was: Beckets)
Israel Stein
- [pianotech] [Files] Piano-Forte
Tom Driscoll
- [pianotech] Scheduling
Scott Helms, RPT
- [pianotech] Interesting upright jack
David Ilvedson
- [pianotech] Archive Search
Matthew Todd
- [pianotech] Standard Tuning Prices
KeyKat88 at aol.com
- [pianotech] Broken Agraffe
Matthew Todd
- [pianotech] Broken Agraffe
Jon Page
- [pianotech] Standard Tuning Prices
pianofritz50 at aol.com
- [pianotech] PTJ
Mike Kurta
- [pianotech] PTJ
Dempsey Jr., Paul E
- [pianotech] hammer issue
Steven Hopp
- [pianotech] Stringing question and puzzler for the day
Stephen Grattan
- [pianotech] Stringing question and puzzler for the day
PAULREVENKOJONES at aol.com
- [pianotech] Standard Tuning Prices
David Ilvedson
- [pianotech] PTJ
David Ilvedson
- [pianotech] Broken Agraffe
David Ilvedson
- [pianotech] PTJ
JWyatt1492 at aol.com
- [pianotech] Does this frequency response include pianos - bottom to top ?
Duaine & Laura Hechler
- [pianotech] Stringing question and puzzler for the day
Jon Page
- [pianotech] Does this frequency response include pianos - bottom to top ?
Jon Page
- [pianotech] Broken Agraffe
KeyKat88 at aol.com
- [pianotech] hammer issue
KeyKat88 at aol.com
- [pianotech] Does this frequency response include pianos - bottom to top ?
Diane Hofstetter
- [pianotech] # of Tuning pin windings...
David Ilvedson
- [pianotech] Standard Tuning Prices
David Ilvedson
- [pianotech] OT: Online Security (IE, Chrome, Safari duped by bogus PayPal SSL cert . The Register)
Duaine & Laura Hechler
- [pianotech] OT: Windows Genuine Advantage (WGA)
Duaine & Laura Hechler
- [pianotech] OT: Offensive vs Informative
Duaine & Laura Hechler
- [pianotech] Size 2 pins
Chuck Behm
- [pianotech] Hammers
Richard
- [pianotech] Size 2 pins
PAULREVENKOJONES at aol.com
- [pianotech] Treeble hammer felt cover
Pierre Pouliot
- [pianotech] Beckets
David Ilvedson
- [pianotech] OT: Online Security (IE, Chrome, Safari duped by bogus PayPal SSL cert . The Register)
David Ilvedson
- [pianotech] Broken Agraffe
David Ilvedson
- [pianotech] Broken Agraffe
David Ilvedson
- [pianotech] Broken Agraffe
Jon Page
- [pianotech] Beckets!!!
Joseph Garrett
- [pianotech] Size 2 pins
Chuck Behm
- [pianotech] Size 2 pins- Darn you Paul!
G Cousins
- [pianotech] New "Multi-" Tool
paul bruesch
- [pianotech] Does this frequency response include pianos - bottom to
Bruce Dornfeld
- [pianotech] Broken Agraffe
David Ilvedson
- [pianotech] tool cases and ...
Qshooterq at aol.com
- [pianotech] Scheduling
Qshooterq at aol.com
- [pianotech] More difficult than upright damper spoons
Diane Hofstetter
- [pianotech] PTJ
tuningbyday at msn.com
- [pianotech] More difficult than upright damper spoons
David Ilvedson
- [pianotech] Broken hammer shank on a Yamaha Spinet
Rob McCall
- [pianotech] Broken hammer shank on a Yamaha Spinet
pmc033 at earthlink.net
- [pianotech] broken Spinet Hammer Shank
Joseph Garrett
- [pianotech] Broken hammer shank on a Yamaha Spinet
PAULREVENKOJONES at aol.com
- [pianotech] broken Spinet Hammer Shank
David Ilvedson
- [pianotech] T-Mobile has announced, that it was unable to recover Sidekick data after a server failure at, Microsoft subsidiary Danger.
Duaine & Laura Hechler
- [pianotech] tape residue
Barbara Richmond
- [pianotech] PTJ
David Ilvedson
- [pianotech] tape residue
wjstuner at juno.com
- [pianotech] tape residue
Bruce Dornfeld
- [pianotech] Fwd: tape residue
Barbara Richmond
- [pianotech] tape residue
Barbara Richmond
- [pianotech] PTBiz data extraction available
allan at sutton.net
- [pianotech] broken Spinet Hammer Shank
Joseph Garrett
- [pianotech] Steinway Upright Double Flanges
Patrick C. Poulson
- [pianotech] New shop lighting and accessories
barbara at pitchperfectpianos.com
- [pianotech] New shop lighting and accessories
Dave Davis
- [pianotech] piano stairs
Ron Nossaman
- [pianotech] Steinway Double Flanges
Joseph Garrett
- [pianotech] New shop lighting and accessories
Barbara Richmond
- [pianotech] Shop Lighting?
Joseph Garrett
- [pianotech] OT - Tune-a-Piano Sandwiches
Israel Stein
- [pianotech] New shop lighting
Chuck Behm
- [pianotech] New shop lighting and accessories
Bruce Dornfeld
- [pianotech] Shop lighting
Larry Fisher RPT
- [pianotech] OT - Tune-a-Piano Sandwiches
David Ilvedson
- [pianotech] New shop lighting and accessories
Barbara Richmond
- [pianotech] Drilling Pinblocks from the bottom
David Love
- [pianotech] Drilling pinblocks from the bottom
Joseph Garrett
- [pianotech] Problem w/ Shop Lighting
Joseph Garrett
- [pianotech] Drilling pinblocks from the bottom
Joseph Garrett
- [pianotech] Drilling pinblocks from the bottom
Joseph Garrett
- [pianotech] Vanda King's
David Nereson
- [pianotech] Shop Lighting
Rob & Helen Goodale
- [pianotech] The Talking Piano
Court Stewart
- [pianotech] New shop lighting and accessories
Dave Hulbert, RPT
- [pianotech] thingies
Leslie W Bartlett
- [pianotech] Drilling pinblocks from the bottom
Joseph Garrett
- [pianotech] Drilling pinblocks from the bottom
Joseph Garrett
- [pianotech] re.Drilling Pinblocks....
Joseph Garrett
- [pianotech] Drilling pin blocks - - Nossaman
Joseph Garrett
- [pianotech] Verituner owners - cross post
Ron Koval
- [pianotech] disregard this OT message test
David Nereson
- [pianotech] Kawai hammer
Keith McGavern
- [pianotech] short scale bass strings
James Johnson
- [pianotech] Yamaha vs. Kawaii
Steven Hopp
- [pianotech] Kawai hammer
PAULREVENKOJONES at aol.com
- [pianotech] short scale bass strings
PAULREVENKOJONES at aol.com
- [pianotech] short scale bass strings
Jon Page
- [pianotech] S&S Damper thump
Phil Bondi
- [pianotech] Verituner owners - cross post
pianofritz50 at aol.com
- [pianotech] Bechstein
Dempsey Jr., Paul E
- [pianotech] Restringing with original pinblock
Al Guecia/AlliedPianoCraft
- [pianotech] Restring Chickering using orig pin block
Joseph Garrett
- [pianotech] Somewhat OT, did one of us do this?
jimfrazee at msn.com
- [pianotech] Restringing with original pinblock
Al Guecia/AlliedPianoCraft
- [pianotech] Restringing with original pinblock
Al Guecia/AlliedPianoCraft
- [pianotech] Restring Chickering using orig pin block
Chuck Behm
- [pianotech] Restringing with original pinblock
Jon Page
- [pianotech] spokane, WA tech
David Ilvedson
- [pianotech] Restringing with original pinblock
Al Guecia/AlliedPianoCraft
- [pianotech] Restringing with original pinblock
Al Guecia/AlliedPianoCraft
- [pianotech] Making a fully fitted pinblock without measurements
William Truitt
- [pianotech] Making a fully fitted pinblock without measurements
pmc033 at earthlink.net
- [pianotech] U1 - stained bass strings
Rob Mitchell
- [pianotech] pianotech Digest, Vol 12, Issue 163
Bruce Gibson Piano Technician
- [pianotech] squeeky knuckles
Steven Hopp
- [pianotech] squeeky knuckles
Barbara Richmond
- [pianotech] OT-radio interview tomorrow, 10/20/09
pianolover 88
- [pianotech] What kind of action?
Barbara Richmond
- [pianotech] What kind of action?
Barbara Richmond
- [pianotech] What kind of action?
Jon Page
- [pianotech] FW: Las Vegas2010 - OT
G Cousins
- [pianotech] What kind of action?
JWyatt1492 at aol.com
- [pianotech] What kind of action?
Barbara Richmond
- [pianotech] What kind of action?
Barbara Richmond
- [pianotech] pianotech Digest, Vol 12, Issue 163
Joseph Garrett
- [pianotech] Some rebuilding videos
David Ilvedson
- [pianotech] What kind of action?
Joseph Garrett
- [pianotech] What kind of action?
Dempsey Jr., Paul E
- [pianotech] Some rebuilding videos
David Ilvedson
- [pianotech] Take Me With You Charts
Patrick C. Poulson
- [pianotech] [CAUT] Bechstein model B tuning stability
David Love
- [pianotech] pianotech Digest, Vol 12, Issue 175
Joseph Garrett
- [pianotech] Norm
James Grebe
- [pianotech] Norm
David Ilvedson
- [pianotech] sticking key
Ed Carwithen
- [pianotech] sticking key
David Ilvedson
- [pianotech] pianotech Digest, Vol 12, Issue 177
Ronny Boyd
- [pianotech] help for identification
Pierre Pouliot
- [pianotech] What kind of action?
Barbara Richmond
- [pianotech] Finger Cymbal Sounds
Steven Hopp
- [pianotech] Norm - O.T.
Joseph Garrett
- [pianotech] Piano Equipment for Sale
Teresa Case
- [pianotech] Norm - O.T.
David Ilvedson
- [pianotech] Finger Cymbal Sounds
PAULREVENKOJONES at aol.com
- [pianotech] U1 - stained bass strings
Barbara Richmond
- [pianotech] Norm - O.T.
Joseph Garrett
- [pianotech] Metal damper lever flanges with spring???
David Pritchard
- [pianotech] Piano Equipment for Sale
chip tuthill
- [pianotech] Norm - O.T.
Joseph Garrett
- [pianotech] Squeaking soft "creaking" pedal problem
Gerald Groot
- [pianotech] More difficult than upright damper spoons
KeyKat88 at aol.com
- [pianotech] U1 - stained bass strings
David Ilvedson
- [pianotech] weights of hammers and shanks/replacement parts
KeyKat88 at aol.com
- [pianotech] Drilling pinblocks from the bottom
KeyKat88 at aol.com
- [pianotech] weights of hammers and shanks/replacement parts
Barbara Richmond
- [pianotech] U1 - stained bass strings
David Ilvedson
- [pianotech] U1 - stained bass strings
David Ilvedson
- [pianotech] weights of hammers and shanks/replacement parts
David Stanwood
- [pianotech] weights of hammers and shanks/replacement parts
PAULREVENKOJONES at aol.com
- [pianotech] Web Site Usefullness
pmc033 at earthlink.net
- [pianotech] Fwd: absolutely unbelievable! all you music lovers...
Terry Beckingham
- [pianotech] Effect of Teflon on damper felts, and VS Profelt on damper wire bushings?
david at piano.plus.com
- [pianotech] a quick question
Marshall Gisondi
- [pianotech] pianotech Digest, Vol 12, Issue 197
Marshall Gisondi
- [pianotech] Fwd: absolutely unbelievable! all you music lovers...
Jon Page
- [pianotech] Need tool identification
Keith McGavern
- [pianotech] weights of hammers and shanks/replacement parts
David Ilvedson
- [pianotech] Need tool identification
mick johnson
- [pianotech] Fwd: absolutely unbelievable! all you music lovers...
david at piano.plus.com
- [pianotech] Need tool identification
PAULREVENKOJONES at aol.com
- [pianotech] Need tool identification
PAULREVENKOJONES at aol.com
- [pianotech] I found it
Marshall Gisondi
- [pianotech] Metal damper lever flanges with spring???
wjstuner at juno.com
- [pianotech] Air compressor substitute (was: Need tool identification)
Israel Stein
- [pianotech] Tokiwa S&F
William Monroe
- [pianotech] Wing Nuts
Brian Doepke
- [pianotech] still waiting for something from Bechstein....
piannaman at aol.com
- [pianotech] Don't work for this manufacturer
wimblees at aol.com
- [pianotech] Don't work for this manufacturer
KeyKat88 at aol.com
- [pianotech] Don't work for this manufacturer
KeyKat88 at aol.com
- [pianotech] Don't work for this manufacturer
KeyKat88 at aol.com
- [pianotech] finish question
Greg Newell
- [pianotech] Employer??
Joseph Garrett
- [pianotech] don't do work for this manufacturer...yadayada
Joseph Garrett
- [pianotech] Finsih Question...!!!???
Joseph Garrett
- [pianotech] Cutting off your nose to spite your face (was:Don't work for this manufacturer)
Israel Stein
- [pianotech] Richmond Area Tuner?
Amadeus Piano
- [pianotech] RE;Don't work for this manufacturer
Michael Magness
- [pianotech] finish questions
G Cousins
- [pianotech] Don't work for this manufacturer
Alan Forsyth
- [pianotech] question
Marshall Gisondi
- [pianotech] Richmond Area Tuner?
Mark Wisner
- [pianotech] question
Qshooterq at aol.com
- [pianotech] Puzzler 10/26/09
John Formsma
- [pianotech] about that piano
Marshall Gisondi
- [pianotech] finish questions
G Cousins
- [pianotech] Verdigris
Richard
- [pianotech] finish pics downloads
G Cousins
- [pianotech] Puzzler 10/26/09
pmc033 at earthlink.net
- [pianotech] Don't work for this manufacturer
Mark Wisner
- [pianotech] Schwander grand jacks
Warren & Cindy Stieg
- [pianotech] Mysterious Key Noise
David Ilvedson
- [pianotech] more on the mystery damper problem
Marshall Gisondi
- [pianotech] Don't work for this manufacturer
Israel Stein
- [pianotech] Don't work for this manufacturer
Mark Wisner
- [pianotech] Mysterious Key Noise
Zeno Wood
- [pianotech] Schwander grand jacks
dbpowell1 at juno.com
- [pianotech] chipping tone generator for a PDA?
jim ialeggio
- [pianotech] damper problem
Marshall Gisondi
- [pianotech] leather injectors
Ron Nossaman
- [pianotech] damper problem
David Ilvedson
- [pianotech] Don't work for this manufacturer
Israel Stein
- [pianotech] Stringing Case
Matthew Todd
- [pianotech] Don't work for this manufacturer
Diane Hofstetter
- [pianotech] chipping tone generator for a PDA?
Diane Hofstetter
- [pianotech] the mystery continues
Marshall Gisondi
- [pianotech] leather injectors
Jon Page
- [pianotech] Stringing Case
mick johnson
- [pianotech] Collection Agencies
Matthew Todd
- [pianotech] Collection Agencies
mick johnson
- [pianotech] Collection Agencies
PAULREVENKOJONES at aol.com
- [pianotech] Piano Stairs
david at piano.plus.com
- [pianotech] Workload
Richard
- [pianotech] Key tap
Richard
- [pianotech] [Fwd: Working for manufacturers, was Re: Don't work for this manufacturer]
Mike Spalding
- [pianotech] Don't work for this manufacturer
Jon Page
- [pianotech] Workload
mick johnson
- [pianotech] Don't work for this manufacturers
Israel Stein
- [pianotech] Pic
david at piano.plus.com
- [pianotech] Pic
david at piano.plus.com
- [pianotech] Holy Crap it's CRAP!
Rob & Helen Goodale
- [pianotech] damper problem
Marshall Gisondi
- [pianotech] Fwd: Samick warranty protocol.
Roger Jolly
- [pianotech] Mold Question
Greg Hollister
- [pianotech] Collection Agencies
David Ilvedson
- [pianotech] Stringing Case
David Ilvedson
- [pianotech] "new" tuning check
wimblees at aol.com
- [pianotech] Procedure manual for working with manufacturers AND dealers
Diane Hofstetter
- [pianotech] Procedure manual for working with manufacturers AND dealers
PAULREVENKOJONES at aol.com
- [pianotech] pianotech Digest, Vol 12, Issue 252
Joseph Garrett
- [pianotech] "new" tuning check
David Ilvedson
- [pianotech] pianotech Digest, Vol 12, Issue 252
PAULREVENKOJONES at aol.com
- [pianotech] Mold growth
david at piano.plus.com
- [pianotech] plate refinishing
Marcel Carey
- [pianotech] scheduling program
Brian Doepke
- [pianotech] plate refinishing
G Cousins
- [pianotech] Plate refinishing
Joseph Garrett
- [pianotech] FW: Prevent Swine Flu - Good Advice
Jim Busby
- [pianotech] scheduling program
pmc033 at earthlink.net
- [pianotech] manual/class on relationships with dealers andmanufacturers
David Ilvedson
- [pianotech] manual/class on relationships with dealers and manufacturers
Joseph Garrett
- [pianotech] Workload
Chuck Behm
- [pianotech] Workload
Porritt, David
- [pianotech] Workload
Chuck Behm
- [pianotech] Mold growth
Jim Henson
- [pianotech] scheduling program (Bill Fritz)
pianofritz50 at aol.com
- [pianotech] Fwd: Samick warranty protocol. (Bill Fritz)
pianofritz50 at aol.com
- [pianotech] Mold growth
david at piano.plus.com
- [pianotech] Workload
Chuck Behm
- [pianotech] YC Action Brackets
toddpianoworks at att.net
- [pianotech] Workload
Chuck Behm
- [pianotech] the thread regarding number of tunings
Chuck Behm
- [pianotech] the thread regarding number of tunings
Marshall Gisondi
Last message date:
Sat Oct 31 22:25:32 MDT 2009
Archived on: Sat Oct 31 22:25:47 MDT 2009
This archive was generated by
Pipermail 0.09 (Mailman edition).
This PTG archive page provided courtesy of
Moy Piano Service, LLC