Marshall, There are set screws to hold the legs in the holes. Look on the sides of the blocks. Robert Mihlfeld --- On Sat, 10/24/09, Marshall Gisondi <pianotune05 at hotmail.com> wrote: From: Marshall Gisondi <pianotune05 at hotmail.com> Subject: [pianotech] a quick question To: pianotech at ptg.org Date: Saturday, October 24, 2009, 6:08 PM Hi Everyone, I have a question and I hope it's not a stupid one. I'm trying to figure out how to put my action cradle together. The metal legs go into the holes on that solid piece where the cylindar that clamps the action rests. Are the legs suposed to scew in or just sit in the hoes. Turning them to tighten doesn't bear any results. They sit in there so loose that I'm afraid the action won't be secure when I head out Tuesday to do a repair hopefully a quick one. Any ideas on how to secure the legs? Thanks Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA New Windows 7: Find the right PC for you. Learn more. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091024/a92eef2c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC