Roofing Nails [Large Heads] cover Agraffe Holes well.... Good luck, Marcel!!! isaac On Oct 30, 2009, at 8:25 AM, Joseph Garrett wrote: > > Marcel asked: "I was just wondering what you guys use to cover the > agraffes' holes when you refinish a plate. It's been so long that I > don't remember. > > I guess not remembering must be part of the wisdom age. ;-)" > > Marcel, > My refinisher uses those decrative upholstery tacks/nails. I > usually, if I'm doing a rattlecan thingee, use pieces of wood dowel > rod 'screwed' into the holes. Then I use a milling bit to clean the > paint off of the agraffe seat area. > Hope that helps. > Joe > > Joe Garrett, R.P.T. (Oregon) > Captain, Tool Police > Squares R I > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091030/0a37a1b7/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC