| -----Original Message----- | From: pianotech-bounces at ptg.org | [mailto:pianotech-bounces at ptg.org] On Behalf Of George F Emerson | Sent: October 08, 2009 12:32 AM | To: pianotech at ptg.org | Subject: Re: [pianotech] Strike Point | | RonN wrote: | > I'm told it's a casting shrinkage thing, where the Vbar | isn't where it | > should be. Whatever. | | It's common practice these day to make the Vbar oversized, | and machine it down on CNC machinery. I'm fairly confident | that casting shrinkage is a non-issue, and the Vbar is right | where I said it should be. I'm just not so sure that where I | said it should be is really where it ought to be. I think you have a lot more confidence in foundry work than I do. I believe the machining is correct only after I personally measure and compare it with the actual design drawings. I've found this stuff off too many times even in foundries with nice shiny CNC machines. ddf
This PTG archive page provided courtesy of Moy Piano Service, LLC