I have a cheap grand to restore. The kind that does not really worth it. I'm doing it to learn and practice. For simplicity (and economy), I'll try to fill the partially delamited pinblock with epoxy. I saw the Epotek 301 is a recommanded product. I'm trying to order some. But what if I use standard epoxy. I use 5 to 1 regular lamination epoxy for a lot of general work. It work well on wood. We used it for building boats (epoxy on cedar). the question is how will it hold pin torque? Any recommandations before I try it? _____ J’utilise la version gratuite de SPAMfighter pour utilisateurs privés. Jusqu’à présent SPAMfighter a bloqué 3204 courriels spam. Nous avons en ce moment 6 millions d’utilisateurs de par le monde entier. Les utlisateurs payants n’ont pas ce message. Vous pouvez télécharger la version gratuite <http://www.spamfighter.com/lfr> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091006/f35e509f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC