There is small screws in the holes that tighten against the tubes. I found that the screws were hard to work with, being so small. So I substituted Allen screws, and use an Allen wrench. John Ross Windsor, Nova Scotia ----- Original Message ----- From: Marshall Gisondi To: pianotech at ptg.org Sent: Saturday, October 24, 2009 10:08 PM Subject: [pianotech] a quick question Hi Everyone, I have a question and I hope it's not a stupid one. I'm trying to figure out how to put my action cradle together. The metal legs go into the holes on that solid piece where the cylindar that clamps the action rests. Are the legs suposed to scew in or just sit in the hoes. Turning them to tighten doesn't bear any results. They sit in there so loose that I'm afraid the action won't be secure when I head out Tuesday to do a repair hopefully a quick one. Any ideas on how to secure the legs? Thanks Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA ------------------------------------------------------------------------------ New Windows 7: Find the right PC for you. Learn more. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091024/f3383373/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC