It's not the customer that see's the becket's guys, sorry, it's the next technician. From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Al Guecia/AlliedPianoCraft Sent: Tuesday, October 06, 2009 4:58 PM To: pianotech at ptg.org Subject: Re: [pianotech] pick-a-little-talk-a-little What's a becket? From: Paul <mailto:pwilliams4 at unlnotes.unl.edu> T Williams Sent: Tuesday, October 06, 2009 4:49 PM To: pianotech at ptg.org Subject: Re: [pianotech] pick-a-little-talk-a-little I think it was for the dude who "coined" the phrase with his own name! 1250 years ago or so. I could be mistaken, but Steve Brady told me that when I started studying with him long....long ago! ;>) somebody way back when....;>) Paul From: wimblees at aol.com To: pianotech at ptg.org Date: 10/06/2009 01:12 PM Subject: Re: [pianotech] pick-a-little-talk-a-little _____ I don't remember ever having a client even say the word becket. Which begs the question, why is it called a becket? Wim -----Original Message----- From: Dempsey Jr., Paul E <dempsey at marshall.edu> To: pianotech at ptg.org <pianotech at ptg.org> Sent: Tue, Oct 6, 2009 6:15 am Subject: [pianotech] pick-a-little-talk-a-little My, my, my. Who would have thought that there would be this much to say about beckets? When I was 17, one of my mentors was Mr. U. Glenn Jeffers, who was a former VP of the old NAPT, or was it ASPT? Don't matter. By then it was PTG and he was in that. He was the first person to say to me that one of the highest levels of craftsmanship was to have all the beckets at the same position...preferably, at three o'clock. Being a neophyte I took him at his word and have spent the last 45 YEARS trying to get all my beckets to lie at 3:00. A frustrating 45 years. I have re-strung hundreds of pianos, large and small, upright and grand, countless single string replacements, and not one of them have had every becket end up at the magic 3:00 position. Mow, many have, many at 2:00 and 1:00,1:30, 3:20, even 4:30. Failure after failure. Woe. At least they always end up on the right hand side of the pin, always the correct number of coils, coils always tight and square to the pin, excellent torque....but those freakin' beckets. I probably would have shot myself in the eye by now except, shortly after Mr. Jeffers' pronouncement; I learned to think for myself. Precision placement of the beckets is nice if you can get it. If you're compelled for it, go for it. I don't think it means squat. I just replaced a set of bass strings on a Yamaha grand that the owner had killed with Pledge or something. I looked at every becket on the factory stringing and they all were in the 1:00 to 4:00 position. My new Bass strings were all in the 1:00 to 3:00 spot. I doubt that the customer will notice. I don't remember ever having a client even say the word becket. Paul E. Dempsey, RPT Piano Technician Sr. Marshall University Huntington, WV 304-696-5418 304-617-1149 _____ avast! Antivirus <http://www.avast.com> : Outbound message clean. Virus Database (VPS): 091006-0, 10/06/2009 Tested on: 10/6/2009 6:42:40 PM avast! - copyright (c) 1988-2009 ALWIL Software. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091006/5246d503/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC