Try reducing the clearance height so the dampers don't fall so far. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Phil Bondi Sent: Thursday, October 15, 2009 7:06 PM To: Newtonville Subject: [pianotech] S&S Damper thump Hi all. I ran across a S&S L (1967) today that had really loud thump when the dampers come back to rest. At one point, I had enough spring tension on that part of the trap work that I could barely press down on the pedal, but the thump was gone!..obviously not the correct fix. I'm thinking that the only fix for this is to change out the damper felt. Are there any other thoughts? I appreciate them. -Phil Bondi(Fl)
This PTG archive page provided courtesy of Moy Piano Service, LLC