That sounds great (about the slot) - now how many turns should I back out the pin ? Thanks, Duaine On 03/22/2012 09:40 PM, William Monroe wrote: > Make a dummy tuning pin - cut a slot in the head of the pin, down to the eye. Make your coils and then it slides off. > However, you have to open up the coil anyway to get it on the pin in the piano. I don't worry about it. I use a > normal pin most of the time, wind my coils, use an awl to pull out the becket and place it on the pin in the piano. > Lift and tighten with pliers/vise grips/whatever as you pull it up to pitch. > > WRM > > > > On Thu, Mar 22, 2012 at 9:12 PM, Duaine Hechler <dahechler at att.net <mailto:dahechler at att.net>> wrote: > > What is the secret of getting the becket out of the hand coiler pin (without messing up the coils) ? > > I finally gave it up and learned how to make nice tight coils (around the pin) in the process of string > replacement (with the proper number of coils on the pin) > > Duaine > > On 03/22/2012 08:58 PM, William Monroe wrote: > > Lewis, > > No, it is not designed for restringing. It is designed to aid in single string replacements where the pin is > still in the piano. It does a nice job, taking only slightly longer than doing it with the hand held coil > maker and pin crank. > > ;-] > > I bought one when I was in a tool buying mood many years ago. A few months later, I got a hand held coiler > and never looked back. > > William R. Monroe > > -- Duaine Hechler Piano, Player Piano, Pump Organ Tuning, Servicing& Rebuilding Reed Organ Society Member Florissant, MO 63034 (314) 838-5587 dahechler at att.net www.hechlerpianoandorgan.com -- Home& Business user of Linux - 11 years
This PTG archive page provided courtesy of Moy Piano Service, LLC