Hey Joe Garrett, you asked that I post pictures of those rubber caster that required countersinking into the legs. Last summer I used my Dremel multimax tool to do the digging (and I found a broken drill bit in one of the legs). Anyway, the piano is finally going home. The owner worked on the finish and I worked on the innards (and the casters). It's a Packard! Barbara Richmond, RPT near Peoria, Illinois ----- Forwarded Message ----- From: "Barbara Richmond" <brbr_rchmnd at yahoo.com> To: "Barbara Richmond" <piano57 at comcast.net> Sent: Wednesday, April 27, 2011 11:25:26 PM Subject: Nancy's Packard -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110428/39e86b34/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN2927.jpg Type: image/jpeg Size: 73149 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110428/39e86b34/attachment-0002.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN2932.jpg Type: image/jpeg Size: 89949 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110428/39e86b34/attachment-0003.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC