[pianotech] Those casters I worked on.

[Al Guecia/Allied PianoCraft]

Barbara,

You can't be waisting punching like that. There goes the profits!  :-)

Al -
High Point, NC



On Apr 28, 2011, at 12:35 AM, Barbara Richmond wrote:

> Hey Joe Garrett, you asked that I post pictures of those rubber caster that required countersinking into the legs.  Last summer I used my Dremel multimax tool to do the digging (and I found a broken drill bit in one of the legs).
> 
> Anyway, the piano is finally going home.  The owner worked on the finish and I worked on the innards (and the casters).
> 
> It's a Packard! 
> 
> Barbara Richmond, RPT
> near Peoria, Illinois
> 
> 
> ----- Forwarded Message -----
> From: "Barbara Richmond" <brbr_rchmnd at yahoo.com>
> To: "Barbara Richmond" <piano57 at comcast.net>
> Sent: Wednesday, April 27, 2011 11:25:26 PM
> Subject: Nancy's Packard
> 
> 
> <DSCN2927.jpg><DSCN2932.jpg>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110428/aa60a0f8/attachment.htm>