I don't know. I've made a couple of bags from single width. It's fussy work, but not rocket science. Perhaps there is some new problem introduced when you try to go double wide. Greg Newell wrote: > My understanding is that this is fraught with failures. Joe > (Joewoodworker.com) himself couldn't sell me a bag of the needed width. Why > didn't he just glue them together? > > Greg Newell > Greg's Piano Forté > www.gregspianoforte.com > 216-226-3791 (office) > 216-470-8634 (mobile) > > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf > Of Mike Spalding > Sent: Thursday, March 25, 2010 4:32 PM > To: pianotech at ptg.org > Subject: Re: [pianotech] Vacuum clamping bags > > You could glue two or more sheets together for whatever width you need... > > Greg Newell wrote: > >> Joe's bag material isn't wide enough. >> >> Greg Newell >> Greg's Piano Forté >> www.gregspianoforte.com >> 216-226-3791 (office) >> 216-470-8634 (mobile) >> >> >> -----Original Message----- >> From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On >> > Behalf > >> Of Mike Spalding >> Sent: Thursday, March 25, 2010 12:14 AM >> To: pianotech at ptg.org >> Subject: Re: [pianotech] Vacuum clamping bags >> >> Greg, >> >> You may have to fabricate your own. Joe sells urethane sheet by the >> yard, glue, and vacuum fittings. It's not that difficult. >> >> Mike >> >> Greg Newell wrote: >> >> >>> Does anyone have sources for Vacuum clamping bags other than either >>> joewoodworker.com or vacupress.com? I’m looking for a size at least 5’ >>> >>> >> wide >> >> >>> by 8’ long. >>> >>> Greg Newell >>> Greg's Piano Forté >>> www.gregspianoforte.com >>> 216-226-3791 (office) >>> 216-470-8634 (mobile) >>> >>> >>> >>> >>> >>> >>> >> >> > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC