[pianotech] Vacuum clamping bags

[Greg Newell]

My understanding is that this is fraught with failures. Joe
(Joewoodworker.com) himself couldn't sell me a bag of the needed width. Why
didn't he just glue them together?

Greg Newell
Greg's Piano Forté
www.gregspianoforte.com
216-226-3791 (office)
216-470-8634 (mobile)


-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Mike Spalding
Sent: Thursday, March 25, 2010 4:32 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Vacuum clamping bags

You could glue two or more sheets together for whatever width you need...

Greg Newell wrote:
> Joe's bag material isn't wide enough.
>
> Greg Newell
> Greg's Piano Forté
> www.gregspianoforte.com
> 216-226-3791 (office)
> 216-470-8634 (mobile)
>
>
> -----Original Message-----
> From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On
Behalf
> Of Mike Spalding
> Sent: Thursday, March 25, 2010 12:14 AM
> To: pianotech at ptg.org
> Subject: Re: [pianotech] Vacuum clamping bags
>
> Greg,
>
> You may have to fabricate your own. Joe sells urethane sheet by the 
> yard, glue, and vacuum fittings. It's not that difficult.
>
> Mike
>
> Greg Newell wrote:
>   
>> Does anyone have sources for Vacuum clamping bags other than either
>> joewoodworker.com or vacupress.com? I’m looking for a size at least 5’
>>     
> wide
>   
>> by 8’ long.
>>
>> Greg Newell
>> Greg's Piano Forté
>> www.gregspianoforte.com
>> 216-226-3791 (office)
>> 216-470-8634 (mobile)
>>
>>
>>
>>
>>   
>>     
>
>
>