[pianotech] help

[Greg Newell]

Ursula,

                I haven’t seen this mentioned yet but I’m guessing that
you’ve already looked for this. Are the drop screws dragging on the
underside of the pin block?

 

Greg Newell

Greg's Piano Forté

www.gregspianoforte.com

216-226-3791 (office)

216-470-8634 (mobile)

 <http://www.wealthyaffiliate.com?a_aid=NNaYfMKd>
http://www.wealthyaffiliate.com?a_aid=NNaYfMKd

 

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Ursula Hammerling
Sent: Saturday, February 20, 2010 3:16 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] help

 


No, the shift (left) pedal does not work any more. I am not quite sure what
you mean by the 
pedal return spring/wooden slats could hang up on either the back rail or
balance rail. What would I do to remove the action then?

Ursula

=============

--- On Sat, 2/20/10, Benj. D. Palmer <ben.pianotech at verizon.net> wrote:


From: Benj. D. Palmer <ben.pianotech at verizon.net>
Subject: Re: [pianotech] help
To: pianotech at ptg.org
Date: Saturday, February 20, 2010, 12:42 PM

Hi Ursula,

I'll chime in on the 'lowered panel' keybed idea, and the possibility 
that one of the pedal return spring/wooden slats may have broken.
They could hang up on either the back rail or balance rail and still 
allow you to lift and shift. Do all the pedals work properly?

-Ben Palmer
>
>      
>
>     *From:* pianotech-bounces at ptg.org
>     [mailto:pianotech-bounces at ptg.org] *On Behalf Of *Ursula Hammerling
>     *Sent:* Saturday, 20 February 2010 9:31 AM
>     *To:* pianotech at ptg.org
>     *Subject:* [pianotech] help
>
>      
>
>     Hello,
>
>     I very much like an answer to a problem, that I encountered today.
>     I wanted to open a Premier Baby Grand 4'9" and I stumbled upon a
>     problem removing
>     the action. I removed the fall board with cheek blocks attached,
>     and the key slip. There were no other screws holding the action in
>     place. I also removed part of the trap work since I thought, that
>     the broken 'soft' pedal might have something sticking upward to
>     make removing of the action impossible. I was able to lift the
>     front of the action up so I could look underneath, whether a screw
>     might have been drilled through the key bead and so impeding the
>     removal of the action. There was nothing visible. The bass side of
>     the action gave way to about 1/8 of an inch, the treble side moved
>     nothing. (The sustain pedal shifts from right to left). The action
>     felt like being screwed to the back of the piano.
>
>     Does anybody have an idea what I might have missed?
>
>     Thanks for looking at this.
>
>
>     Ursula Hammerling, RPT
>
>
>
>
>      
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> pianotech mailing list
> pianotech at ptg.org
> http://ptg.org/mailman/listinfo/pianotech
>   

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100221/81db34c3/attachment.htm>