[pianotech] Rim Separation

Cliff Lesher lesher at dejazzd.com
Wed Feb 3 08:43:13 MST 2010


On Feb 3, 2010, at 8:39 AM, Barbara Richmond wrote:

> I brought this up a couple years ago--cracks (separation) between  
> the inner and outer rims in a Kawai grand.  Different piano, out of  
> warranty and I've got customers interested in purchasing it.  I had  
> a pleasant talk with Mark Wisner at Kawai.  If the piano was in  
> warranty, the repair would be the ol' flip the piano over, fill 'em  
> up with epoxy, sand and touch up the finish on the bottom of the  
> rim.  I could find a mover to help me do the job, but I was  
> wondering if anybody out there has ever heard of a problem caused  
> by these separations.  Noise?  Obviously, I don't know how long the  
> cracks have been there; the piano, a KG-2, is about 15 years old.   
> I am inclined to say, "let's just leave it and if there's ever a  
> problem we'll fix it"--unless someone gives me a good reason not to...

Barbara,

I think you're right, i.e. "leave it..."

I did the epoxy thing on a new Kawai (GM-2, with PianoDisc) a few  
years ago.  The piano was in a showroom for several months and  
exhibited no problems at all.  A customer became interested in the  
piano and had her tuner inspect the piano.  The tuner discovered the  
separations and declared that the piano should be sent back to  
Kawai.  I discussed the situation with Don Mannino, who convinced me  
that the separations were not catastrophic.  I then did the flip-and- 
fill.  Following the procedure, I was convinced that it was probably  
not necessary, except for an owner who might want to install a mirror  
or chassis cam underneath.

The piano sold and I haven't heard from it since.

Cliff Lesher
Winfield, PA 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100203/4d1e6f60/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC