[pianotech] Bass Top Bridge

[David Ilvedson]

The pump seems logical.   Otherwise you have to use a spoon or something to get it onto the scale.   Which then is thrown away...I haven't used the West stuff yet...

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: Farrell <mfarrel2 at tampabay.rr.com>
To: <pianotech at ptg.org>
Received: 2/26/2009 5:06:20 PM
Subject: Re: [pianotech] Bass Top Bridge


>I agree with you completely Mike regarding weighing the ratio of resin & 
>hardener - only way to do it accurately. However, the pumps only cost a few 
>bucks and they make dispensing the stuff a whole lot easier - super easy to 
>drip out less than a half-gram liquid at a time - the controlled dispensing 
>makes the weighing process very easy and accurate.

>My 2 cents worth.

>Terry Farrell

>----- Original Message ----- 
>From: "Mike Spalding"
>> One more thing - Don't buy the pumps, spend the money instead on a small 
>> digital scale so you can mix by weight.  It's much more accurate, and you 
>> can make really small batches.
>> Mike