[pianotech] Bass Top Bridge

[Mike Spalding]

Or you could pour it off into squeeze bottles..


David Ilvedson wrote:
> The pump seems logical.   Otherwise you have to use a spoon or something to get it onto the scale.   Which then is thrown away...I haven't used the West stuff yet...
>
> David Ilvedson, RPT
> Pacifica, CA  94044
>
> ----- Original message ----------------------------------------
> From: Farrell <mfarrel2 at tampabay.rr.com>
> To: <pianotech at ptg.org>
> Received: 2/26/2009 5:06:20 PM
> Subject: Re: [pianotech] Bass Top Bridge
>
>
>   
>> I agree with you completely Mike regarding weighing the ratio of resin & 
>> hardener - only way to do it accurately. However, the pumps only cost a few 
>> bucks and they make dispensing the stuff a whole lot easier - super easy to 
>> drip out less than a half-gram liquid at a time - the controlled dispensing 
>> makes the weighing process very easy and accurate.
>>     
>
>   
>> My 2 cents worth.
>>     
>
>   
>> Terry Farrell
>>     
>
>   
>> ----- Original Message ----- 
>> From: "Mike Spalding"
>>     
>>> One more thing - Don't buy the pumps, spend the money instead on a small 
>>> digital scale so you can mix by weight.  It's much more accurate, and you 
>>> can make really small batches.
>>> Mike 
>>>       
>
>
>
>