steinway spinet jack springs

[John Ross]

How about the spring making tool in the Schaff tool catalogue.
It is item #872, on page 49.
Then you could make your own.
I had some extra parts made so that I could have a smaller diameter  
coil.

On 30-Sep-08, at 12:41 PM, Melvin Fletcher wrote:

> Does anyone know where to get steinway spinet jack springs?   
> Steinway doesn't sell them anymore and the ones from Schaff don't  
> fit.  I don't want to drill out every hole if I don't have to.  I  
> need a 3/4" tall spring w/ an outside diameter of 3/16" at the  
> bottom.  The ones Schaff sells are 7/32"  Any info is appreciated.

John Ross
Windsor, Nova Scotia, Canada





-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080930/f5865269/attachment.html