Cut flat sawn hard maple plugs. Drill rim, glue (or epoxy) in plugs. Drill plugs. Lube steel screws with beeswax. Run screws in. Better than new. Terry Farrell ----- Original Message ----- From: Jessica Masse To: pianotech at ptg.org Sent: Wednesday, September 03, 2008 7:44 PM Subject: grand hinge to rim screws stripped Hi, Besides drilling and plugging the rim, does anyone have a better way of repairing the hinge screws on a grand piano? This piano is moved several times a year and the rim is less than 3/4 inch thick. Jessica Masse RPT Piano Technicians Guild -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080904/3e13e83c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC