CA Glue for pin blocks

paul bruesch paul at bruesch.net
Wed Jun 4 13:21:12 MDT 2008


Ed,

1/2cc is equivalent to approx 1/60 oz.  That seems like a LOT of
refilling!?!?  At approx 1.5 oz per piano, that's 90 refills. (I think.)

On the few pinblocks I've treated I have just used the long drip tip on the
bottle. I need something a bit more precise, but I'd prefer not to spend a
lot of time and motion in refilling, not to mention it seems that would
increase the risk of spilling an open container!

Paul Bruesch
Stillwater, MN

On Wed, Jun 4, 2008 at 11:02 AM, Ed Sutton <ed440 at mindspring.com> wrote:

> Don-
>
> I'm too lazy to take a photo, but here's a link:
> https://www4.vaxserve.com/index.cfm?event=getProductDetail&product_id=2518&cat_id=43
>
> The ones I use are half size (1/2cc Tuberculin Syringe with 1/2" needle).
> The half-size syringe barrel is about the diameter of a soda straw and fits
> easily between tuning pins.
>
> Pharmacists may call small tuberculin syringes "insulin syringes."
>
> Rinsing with CA solvent may get some extra uses, but at 15 cents each I can
> toss them easily when they clog.
> North Carolina allows over the counter syringe purchases.
>
> Ed Sutton
>
>
> ----- Original Message ----- From: "Don" <pianotuna at accesscomm.ca>
> To: "Ed Sutton" <ed440 at mindspring.com>; "Pianotech List" <
> pianotech at ptg.org>
> Sent: Wednesday, June 04, 2008 8:10 AM
> Subject: Re: CA Glue for pin blocks
>
>
>
>  Hi Ed,
>>
>> Could you post a photo of the tuberculin syringe?
>> Regards,
>> Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T.
>> Non calor sed umor est qui nobis incommodat
>>
>> mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/
>>
>> 3004 Grant Rd. REGINA, SK, S4S 5G7
>> 306-539-0716 or 1-888-29t-uner
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080604/513b6a70/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC