Barbara, The set I have is listed on http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=800. If you don't have a harbor freight close by, like I have, then other discount houses might have something. $15 tops fits my budget. Joel Joel Jones, RPT Madison, WI On Jul 3, 2008, at 1:42 PM, David Skolnik wrote: > Barbara - > I thought you were at the beach! Anyway, one source of these > "stamps" as they are listed, is the company MSC Industrial Supply > Company http://www1.mscdirect.com/cgi/nnsrhm , though I assume you > can find them from any of these full service providers - Grainger or > McMaster Carr, etc. On the MSC home page, click on the Big Book logo > on the right and go to page 2594. You'll see individual stamps as > well as sets (at the bottom). The one I have is 3/32", but I would > probably go with 1/8". > > Cheers (plagiarized) > > David Skolnik > Hastings on Hudson, NY > > > At 09:56 AM 7/3/2008, you wrote: >> Hi David, >> >> Hmm, I just did a search on the internet for the steel number >> punches. Do you use the punches that are numbered separately, or the >> punch that sort of looks like an ink punch, but isn't. If you're >> using the separate punches, what size? I'm not at home right now and >> I'd hate to ask the house-sitter to try to measure numbers on keys >> (if he could even find them....that is, keys or the numbers....). >> >> Thanks. >> >> Barbara Richmond, RPT >> not so near Peoria, IL at the moment -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 1553 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080703/10b681b5/attachment.bin
This PTG archive page provided courtesy of Moy Piano Service, LLC