Baldwin spinet "lost motion" issue twice in one week....

[Jon Page]

>but I did not check the possibility of the tape hanging up on the catcher. 

For a while Baldwin used a bridle wire without the traditional twist 
at the end.
They simply placed a 'hump' in the wire and sometimes the strap worked it's
way down the wire. To remedy this, place a bead of glue under the strap
to prevent it from sliding.

Spinet damper spoons are easier to adjust than you think, certainly 
easier than a console.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070330/a9df24a7/attachment.html