chisels

[Farrell]

Jon, this sounds just like what I have had in mind for some time....... but 
have never been able to figure out exactly what to do. Do you have a 
picture? A diagram? A more precise description?

Thanks.

Terry Farrell

----- Original Message ----- 
> On my bridge notching chisel, I changed the contour of the angled side.
> I ground it to a curve to sweep the notch without the 'sharp' back edge
> of the angled section impacting upon the speaking edge of the bridge;
> on the advise of from John MacDonald, RPT; RIP. This produces an
> easy curve to the notching process.
>
> Sharpening: fine sandpaper and a thick glass panel which I also use
> to seat player components.
> Jon Page