The only time I had to replace a hitch pin that pulled out I tapped the hole and screwed in an small bolt cut to size. It was easy and worked fine. Albert. On 3/7/07, Jon Page <jonpage at comcast.net> wrote: > > >West System Two-Step bonding method. > > I would be inclined to use Marine-Tex epoxy putty. > Being a paste, it won't sag. Great stuff. > > *http://tinyurl.com/56upn* > > COMPRESSIVE STRENGTH*: > Gray - 13,000 PSI (910 Kg/Cm2) > White - 8,700 PSI (610 Kg/Cm2) > ADHESION SHEAR STRENGTH*: > Gray - 1,800 PSI (126 Kg/Cm2) > White - 2,300 PSI (160 Kg/Cm2) > TENSILE STRENGTH*: Both White and Gray - 4,000 PSI (280 Kg/Cm2) > > -- > > > Regards, > > Jon Page > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070308/b52dd691/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC