Joe, Pardon my ignorance but what are "sole" tips? A brand name or what? Thanks, Patrick D. PS I didn't find them on your website On Feb 17, 2006, at 11:17 AM, Joe And Penny Goss wrote: > Hi Don, > We carry #2 and #3 "sole" tips > Joe Goss RPT > Mother Goose Tools > imatunr@srvinet.com > www.mothergoosetools.com > ----- Original Message ----- > From: "Don Price" <dcp3@twol.com> > To: "PTG LIST" <pianotech@ptg.org> > Sent: Thursday, February 16, 2006 3:40 PM > Subject: tips > > >> List - I've used the Hale hammer (lever), heads and tips for >> umpteen >> years. Needing to replace a couple of tips and since Hale is not >> longer >> in business, I ordered from Schaff. The Schaff tips fit the >> threads on >> the hammer O.K., but the tip doesn't fit the pins as well as the Hale >> tips did. The Schaff tip seems to fit well on the pin at the >> very end >> of the tip, but there seems an extreme amount in and out play (on an >> upright) on the end of the hammer. On a twelve inch hammer >> length, the >> end of the hammer will move in/out 1 1/2 to 2 inches. The Hale tips >> let the hammer end move less than 1/2 inch. >> >> Do any of you have a recommendation for another place to find tips >> which >> provide a better fit with the pin? >> >> Thanks. >> >> Don >> >> _______________________________________________ >> Pianotech list info: https://www.moypiano.com/resources/#archives > _______________________________________________ > Pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC