Hi Don, We carry #2 and #3 "sole" tips Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Don Price" <dcp3@twol.com> To: "PTG LIST" <pianotech@ptg.org> Sent: Thursday, February 16, 2006 3:40 PM Subject: tips > List - I've used the Hale hammer (lever), heads and tips for umpteen > years. Needing to replace a couple of tips and since Hale is not longer > in business, I ordered from Schaff. The Schaff tips fit the threads on > the hammer O.K., but the tip doesn't fit the pins as well as the Hale > tips did. The Schaff tip seems to fit well on the pin at the very end > of the tip, but there seems an extreme amount in and out play (on an > upright) on the end of the hammer. On a twelve inch hammer length, the > end of the hammer will move in/out 1 1/2 to 2 inches. The Hale tips > let the hammer end move less than 1/2 inch. > > Do any of you have a recommendation for another place to find tips which > provide a better fit with the pin? > > Thanks. > > Don > > _______________________________________________ > Pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC