Personally, I wouldn't even try it on my own "piece of junk" piano. If the pins are THAT loose, use CA! Avery Todd At 11:19 PM 2/10/2006, you wrote: >Maggie, > >By all means, test this idea thoroughly before trying it on a piano. I was >called to tune an old upright a couple months ago. Whole house smelled of >linseed oil. The old oak piano fairly glistened, including the open-face >pinblock. Totally ruined. Every pin spun down to zero tension, no grip >left at all. They were going to experiment with flushing it with lacquer >thinner or acetone, then doping with CA. If it worked, they would call be >back for tuning. No calls yet..... > >Mike > > > > [Original Message] > > From: Maggie Jusiel <mags@magsmusic.net> > > To: <pianotech@ptg.org> > > Date: 2/8/2006 1:15:53 AM > > Subject: boiled lindseed oil > > > > Hello All, > > > > My husband was taught by someone from the Baldwin company out of > > Cincinnati. This person told him that he had used boiled lindseed oil > > sucessfully to restore pin blocks. I'm going to experiment with this at > > home, but wanted to know if anyone else had heard of or tried this...? > > > > Thanks, > > Maggie > > > > > > Maggie Jusiel > > Piano Tuner > > Winds & Strings Teacher > > PO Box 1234 > > Athens, WV 24712-1234 > > (304)952-8615 > > <mags@magsmusic.net> > > <http://www.magsmusic.net> > > > > _______________________________________________ > > Pianotech list info: https://www.moypiano.com/resources/#archives > > >_______________________________________________ >Pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC