This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello List I've just replaced all the front rail, balance rail and touch rail felts = with Wurzen in my S&S "A" (courtesy of Andre, of course) The balance = rail punchings are so very precisely cut they are a joy to use. The = "crescendos" are equally easy to install and the results are truly = amazing - particularly in conjunction with the new Wurzen back-touch = felt. Like the "Crescendos" it is white as are the balance rail = punchings. To remove the old touch felt I use a 3" "cold chisel" which I = have sharpened on the belt sander to a cutting edge. It eats through = that 90 year old hot glue with ease and can be used like a chisel to = remove the residue and clean up. The real plus side is that I found very = little regulation was required after! Once the capstans had been = adjusted for correct striking distance ... that was it! The whole thing = fell into place. Oh yes. At the same time I cut out and glued in place a = new set of damper lift cushions on the key tails. Regards from darkest Sussex Michael G.(UK) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f0/97/06/a6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC