This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment There is a variety of wood that I have seen in case parts. I think more = often than basswood, you will find poplar as a core material - but I = should think poplar would perform quite well indeed in this application = - I think it is a bit harder than basswood, very uniform, but softer = than maple so I should not make noise. I just might try poplar next = time! Terry Farrell ----- Original Message -----=20 From: Erwinspiano@aol.com=20 To: pianotech@ptg.org=20 Sent: Thursday, January 06, 2005 10:19 AM Subject: Re: recycled balance hole repair In a message dated 1/5/2005 6:19:04 P.M. Pacific Standard Time, = terry@farrellpiano.com writes: Keith,Terry By the way you can recycle a whole lot of fine basswood in every = upright. It's usually in the long case parts that they really didn't = want to warp Or block' There is just a whole lot of it. Dale I think Bill Spurlock mentions in his article to make sure the grain = is parallel with the long axis of the key. I used basswood on a set I = did recently. I know that is often used. Some suggest maple, but = Spurlock expressed some concern regarding potential noise with maple. = Most True-Value hardware stores or any decent hobby shop will have a = variety of craft wood of various species and thicknesses. MallWort might = have it, but who would ever go there (ever wonder why you don't have a = crarft store nearby?)? Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/01/22/17/46/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC