> This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ---------------------- multipart/alternative attachment > 3 So in order to retain a more normal bore distance the solution seems t= o be > lowering the entire stack/center pin height. The wippen center is also h= igher > than the nominal 3 & 1/4" from the keybed as quoted by Steinway for the h= eight > so that will go down as well it seems >=20 > We change the height of the stack every so often in our shop; Dale, you c= an > call Steve Bellieu---he=B9s got beaucoup experience with this. >=20 >=20 > I don't see any problem lowering the stack unless it changes the magi= c > line of wippen center to bottom of balance pin intersection of the capsta= n at > half travel radically. >=20 > Exactly. David A. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/84/26/d4/2b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC