When you get into close quarters you can eliminate the socket and use the electric driver direct on the hex screws. Norm Barrett ----- Original Message ----- From: "Tom Driscoll" <tomtuner@comcast.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, September 13, 2004 4:17 PM Subject: Re: dampp-chaser thoughts >I recommend an electric screw driver. I have a version of this Black and > decker model (VP750) that has held up for a few years now. I drive the hex > head screws supplied with the damppchaser system with a magnetic > socket--1/4". > Big time and strain saver. > Good luck. > Tom Driscoll > ----- > Subject: dampp-chaser thoughts > > >> Hi, >> >> Soon enough I will be installing a dampp-chaser for the first time. >> Only knowing basically what to expect, does anyone have a standard >> "what to look for" and "common mistakes" lecture for first-timers? >> >> Thanks. >> >> - John >> > > -------------------------------------------------------------------------------- > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC