This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Jon, Check the damper wood dowel to see if there is enough free play for the = dampers to function correctly. The rod may binding on whatever is on the = tips of the rod. If that is not the problem suspect to find that the = action brackets are not seated properly. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Jonathan Stuchell=20 To: pianotech@ptg.org=20 Sent: Monday, September 13, 2004 8:41 PM Subject: ringing strings I reinstalled an upright action, and now the strings ring. Most of = the dampers are seated well. Should I take the action out and bend the = damper wires? ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7c/f6/f8/d7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC