This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Jonathan: Check to be sure that the action is actually seated correctly, = and that the pedal rods are connected properly and not over adjusted = before you start bending wires. Patrick ----- Original Message -----=20 From: Jonathan Stuchell=20 To: pianotech@ptg.org=20 Sent: Monday, September 13, 2004 7:41 PM Subject: ringing strings I reinstalled an upright action, and now the strings ring. Most of = the dampers are seated well. Should I take the action out and bend the = damper wires? ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/31/c5/e5/8f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC