If you are seeing the keypin move, are you sure the keypin is not simply loose in the rail hole? Terry Farrell ----- Original Message ----- From: "Mike Bratcher" <MBratPianos@indy.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Wednesday, September 08, 2004 8:47 AM Subject: Poor key morticing > Hey folks, > > I wondering if anyone had good ideas or ways of dealing with keys that have > a lot of wood around the balance rail pin. The wood is not allowing the key > to move freely. Actually it is trying to bend the pin, as I can see the pin > moving when played. The keys already have new bushings. This all makes for > VERY poor touch. > > Any thoughts? > > Mike Bratcher > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC