Joe Garrett wrote: > Because our modern piano builders choose/chose to use glues that sped up > production, but are next to impossible to remove with conventional > means, (ie.heat, moisture, etc.), the only way I've found that works is > brute force! First, I "peal" the majority of the felt off. Next, I go to > my 1"X42" vertical sander and SAND the remaining felt off, down to bare > wood. The main problem with this, is that you have to be VERY accurate > with this technique, else you'll have head surfaces that are not square > with the sides. > If someone can come up with something less traumatic, I definately would > like to know what it is! Buy new damper heads ?? :) Anon > Best Regards, > Joe Garrett, R.P.T. > Captain, Tool Police > Squares R I
This PTG archive page provided courtesy of Moy Piano Service, LLC