unfortunately, i have no hammer nr. 88 with the same stiffness/damping factor as a nr. 1. but if you have one, i will try it out ;) regards, Bernhard ----- Original Message ----- From: "David Love" <davidlovepianos@comcast.net> To: "'Pianotech'" <pianotech@ptg.org> Sent: Saturday, October 02, 2004 4:39 PM Subject: RE: Evidence of overlacquered hammers > OK, try putting hammer number 88 on note number 1 and see if you can > tell the difference. > > David Love > davidlovepianos@comcast.net > > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On > Behalf Of Bernhard Stopper > Sent: Saturday, October 02, 2004 8:22 AM > To: Pianotech > Subject: Re: Evidence of overlacquered hammers > > Ron wrote: > > > > And what David said, and what I said is that no choice of hammer that > you > > can make will get more out of the system than the soundboard has to > give. > > > > no, the point was that David said that itīs possible by taking a heavier > hammer to produce more energy. > and thatīs not true when all other parameters remain unchanged. > > regards > > Bernhard > > > ----- Original Message ----- > From: "Ron Nossaman" <rnossaman@cox.net> > To: "Pianotech" <pianotech@ptg.org> > Sent: Saturday, October 02, 2004 5:14 PM > Subject: Re: Evidence of overlacquered hammers > > > > > > >But for me no. The hammer and string is the first component pair that > has > to > > >match to achieve the kind of the spectrum to be produced. > > >The soundboard/string components is the second pair that must match > to > > >achieve the kind of the filtered spectrum to be produced. > > > > And what David said, and what I said is that no choice of hammer that > you > > can make will get more out of the system than the soundboard has to > give. > > > > > > >But there is no direct hammer/soundboard relation without taking > attention > > >of the first hammer/string relation. > > > > Add all the details you like. That doesn't make what we said any less > true. > > > > Ron N > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC