Let-off question

[John Ross]

I knew it was probably something simple, that I hadn't double checked.
I will check it out tomorrow.
Thanks,
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
----- Original Message ----- 
From: "Farrell" <mfarrel2@tampabay.rr.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Wednesday, April 21, 2004 2:44 PM
Subject: Re: Let-off question


> Turn drop screw clockwise. Is the drop screw lined up properly over the
end
> of the wippen?
>
> Terry Farrell
>
> ----- Original Message ----- 
> From: "John Ross" <jrpiano@win.eastlink.ca>
> To: "Pianotech" <pianotech@ptg.org>
> Sent: Wednesday, April 21, 2004 1:12 PM
> Subject: Let-off question
>
>
> > Hi List,
> > What might the problem be?
> > The hammer does not drop that little bit, after let-off.
> > If I weaken the spring, then I don't get the raise, after it comes out
of
> > check, and I still don't get the small drop.
> > This is a grand with new hammers and shanks where the original hammers
> were
> > not available.
> > It is probably something simple that I am forgetting, old age. :-(
> > The jack is coming out from under the knuckle.
> > Best regards,
> > John M. Ross
> > Windsor, Nova Scotia, Canada
> > jrpiano@win.eastlink.ca
> >
> >
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
> >
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>