Turn drop screw clockwise. Is the drop screw lined up properly over the end of the wippen? Terry Farrell ----- Original Message ----- From: "John Ross" <jrpiano@win.eastlink.ca> To: "Pianotech" <pianotech@ptg.org> Sent: Wednesday, April 21, 2004 1:12 PM Subject: Let-off question > Hi List, > What might the problem be? > The hammer does not drop that little bit, after let-off. > If I weaken the spring, then I don't get the raise, after it comes out of > check, and I still don't get the small drop. > This is a grand with new hammers and shanks where the original hammers were > not available. > It is probably something simple that I am forgetting, old age. :-( > The jack is coming out from under the knuckle. > Best regards, > John M. Ross > Windsor, Nova Scotia, Canada > jrpiano@win.eastlink.ca > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC