Band Saw Blade Teeth Material

[Delwin D Fandrich]

----- Original Message ----- 
From: "David Love" <davidlovepianos@earthlink.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: September 11, 2003 8:16 AM
Subject: Re: Band Saw Blade Teeth Material


> Timely that you should bring this up.  I have just started looking into
> buying a new bandsaw and was wondering what I would have to spend to get
> one that would be powerful and accurate enough.  I was certainly hoping
to
> avoid a $2500.  purchase.  Any other experiences out there with different
> makes and models that would care to offer a review.


The large Powermatic bandsaw is, indeed, a beautiful machine. However,
unless it is a central part of a large rebuilding shop, it is probably
overkill.

Take a look at the Delta 14" machine. I've been using the same saw for
close to 30 years now and it has yet to miss a beat. It has been recently
"improved" though I've not seen the improved version. It now sells for
about $900 with deals often available. That's with a 1.5 hp motor and a
stand.

Del