Can't think of an easier way to get around your problem, anyone else? Mike Kurta ----- Original Message ----- From: "Michael Spalding" <spalding48@earthlink.net> To: "Pianotech" <pianotech@ptg.org> Sent: Wednesday, September 03, 2003 8:22 AM Subject: too-thick keytops > Listers: > > Someone asked, a few months ago, do I need to bother removing wood from the > top of the keys before gluing on the thick plastic keytops? Here is the > answer, and a question about how to fix the problem. > > Old upright with new hammers and new keytops, but was way out of > regulation. Had to put thin punchings under the whites and thick under > the blacks in order to keep blacks from burying when played. Problem: > whites are stopped by the front rail punchings under the blacks, so I can't > get proper dip on the whites. I've brought the keys home, planning to > remove 1/16 or so from the bottoms of the whites in line with the black > front rail punchings. Knowing that my first thoughts usually run to "brute > force" solutions", I'm asking if there is a simpler / more elegant / less > intrusive way to fix the problem?? > > thanks, > > Mike > > > Michael Spalding > spalding48@earthlink.net > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC