---------------------- multipart/alternative attachment In a message dated 2/27/03 10:45:32 PM Central Standard Time, donmannino@attbi.com writes: > What are the top 5 reasons why a jack won't return under the hammer butt > in an upright action? > > =still a novice= > > Brian Doepke > doepkeb@comcast.net > 1. Jack flange bushing too tight 2. Jack spring is broken, not tensioned enough, or not in the jack hole 3. Capstan screws turned too high (you need lost motion) 4. Butt spring tensioned too much (The hammer butt should return with help from the spring, but it should have a "floating feeling.") 5. Bridle wire set to far back (should loose slack when the hammer is half way to the strings). Joel Swafford ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9a/fb/0c/a4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC