---------------------- multipart/alternative attachment In a message dated 2/16/2003 12:59:31 PM Eastern Standard Time, RNossaman@cox.net writes: > I've used Titebond before installing, a narrow strip of veneer at either > the front or back of the hole, and/or CA after installation. All work. > I'm curious about the CA. Does this just seep down and fill the gap with the FR pin in place or do you dip the pin in the CA and then insert it? ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fc/02/15/2f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC