---------------------- multipart/alternative attachment In a message dated 2/16/2003 3:08:19 PM Eastern Standard Time, kpiano@goldrush.com writes: > Well, now that you have nice clean flat surfaces, you have to pick the right > thickness bushing cloth for the hole and pin. If you are unlucky enough not > to be able to use Spurlocks mortise sizing cauls, you can fit them > individually or some will be tight and require easing. > Keith R > Front rail pin holes -- NOT front key bushings. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cb/93/d4/21/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC