[pianotech] leg bolts for Horugel grand

[jolly roger]

---------------------- multipart/alternative attachment
Hi Paul,
               They had a wing nut attached, but they either rattled like a 
snare drum, or just fell out. I have twisted them out just installing them 
with light finger pressure.
Use a capstan wrench to install them.
Roger

At 08:21 PM 9/11/02 -0700, you wrote:
>Mark:
>     We just happened to get a large Horrigle (sp?) grand in our store,
>about the same age.  The leg "bolts" are quite unusual, in that they
>have no head that I'm used to seeing.  They are like the leg locking
>bolts on a Young Chang, and have a hole through it so you can use a
>screwdriver shank to tighten it.  Even the cheek blocks have this kind
>of bolt.  I suspect they may have also lost the original bolts, and
>ended up with these.  They stick out like sore thumbs.  I'll try to find
>out the thread size tomorrow and let you know.
>     Paul McCloud
>     San Diego
>
>--
>mailto:pmc333@earthlink.net
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/39/64/71/e4/attachment.htm

---------------------- multipart/alternative attachment--