At 11:34 PM 11/6/2002 +0100, you wrote: >Hello, Jon Page, > >You write : >I was thinking in regards to a line from the tuning pin to > > the hitch pin, not bridge height. ><snip> >Problem is that the size of the laser light itself is a round light >approx 4 mm, and the external of the light is not as clean as the >center. If the width of the focused beam is 4mm, then that is not accurate at all. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC