Laser

[Farrell]

Where ya going with that one Jon? Capo and bridge might be in the way........I guess it would work on some of the pianos I see.........

Terry Farrell
  
----- Original Message ----- 
From: "Jon Page" <jonpage@attbi.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Wednesday, November 06, 2002 4:12 PM
Subject: RE: Laser


> I was thinking in regards to a line from the tuning pin to the hitch pin, 
> not bridge height.
> Regards,
> Jon page
> 
> 
> At 10:02 PM 11/6/2002 +0100, you wrote:
> 
> >I tried , but mine is too high, it could be used to see how the
> >soundboard is curved in regard of the bridge.
> >
> >Beside, it is very useful for alignments, drilling , leveling ...
> >
> >Isaac OLEG
> >
> > > -----Message d'origine-----
> > > De : pianotech-bounces@ptg.org
> > > [mailto:pianotech-bounces@ptg.org]De la
> > > part de Jon Page
> > > Envoye : mercredi 6 novembre 2002 14:14
> > > A : pianotech@ptg.org
> > > Objet : Laser
> > >
> > >
> > > Looking through the latest Deluth Trading Co catalogue, I saw an
> > > interesting item,
> > > a Laser Torpedo Level (# 75770) with Beam Spreader (# 75773)
> > >
> > > http://www.duluthtrading.com/cgi-bin/sgrp0130.exe?T1=75772&S
> >KW=3DTC2&UID=2002110607050485&GEN0=&GEN1=
> >
> >I wonder if the laser combined with the beam spreader would facilitate
> >string alignment and bridge layout.
> >
> >More tools...Arh, Arh, Arh
> >Regards,
> >
> >Jon Page,   piano technician
> >Harwich Port, Cape Cod, Mass.
> >mailto:jonpage@attbi.com
> >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> >_______________________________________________
> >pianotech list info: https://www.moypiano.com/resources/#archives
> >
> >_______________________________________________
> >pianotech list info: https://www.moypiano.com/resources/#archives
> 
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives