Can you expand on your mention of increased precision on the Inca - in your first post you made the comparison of the Mack truck to the other being like a Miata. I realize the best thing to do is cut a pinblock for myself on both machines. I suppose if I dug around enough I might be able to find access to a Delta, but I had not even heard of a Inca until Newton mentioned it and I had seen it in the Garrett Wade catalog. (I do not know anyone with a bandsaw.) Were did you get your machine Newton? I don't seem to find a web site for Inca. Terry Farrell ----- Original Message ----- From: "Newton Hunt" <nhunt@optonline.net> To: <pianotech@ptg.org> Sent: Sunday, March 24, 2002 8:39 AM Subject: Re: Bandsaw Recommendation > There have been a few times when the throat of the Inca was not > sufficient for the task at hand but for the precision and convenience I > still prefer the Inca. A lot of what you get used to. I would rather > quit than switch. :) > > I love my little tool. > > Besides I had access to a 20 incher when I needed it. > > Newton >
This PTG archive page provided courtesy of Moy Piano Service, LLC