Dale Thanks for the tip. Does W.L. Fuller have a website? Please post their address when you have a minute. Paul Chick ----- Original Message ----- From: Erwinpiano <Erwinpiano@email.msn.com> To: <pianotech@ptg.org> Sent: Wednesday, June 20, 2001 8:50 PM Subject: Fw: pinblock drills and drift > David and list > > I have been using the same bits but with a brad point and no wandering. > I got them from W.L. Fuller company which also makes the small > arabolic( David Hughes )style brad point bridge pin bits. Good stuff, not > cheap. > > > Dale Erwin
This PTG archive page provided courtesy of Moy Piano Service, LLC