Thanks, Kent. You've given me justification for owning ONE! Now I can pitch the surplus and not feel bad. Anyone need a couple dozen metal TP bushings? Paul Chick ----- Original Message ----- From: Kent Swafford <kswafford@earthlink.net> To: pianotech list <pianotech@ptg.org> Sent: Wednesday, June 20, 2001 7:28 PM Subject: Re: Tuning pin sleeves. > On 6/20/01 5:05 PM, "John Ross" <piano.tech@ns.sympatico.ca> wrote: > > > I threw the ones I had away, as I was unsatisfied with > > the result, I found that with the metal to metal they would not hold. > > Are they still a recommended fix for loose tuning pins? > > Has anyone actually, used them and been satisfied with the results? > > Did I possibly use them the wrong way, and have been unjust in > > my condemnation of them? > > As I have written here before, I find metal tuning pin sleeves useful, or > rather, I find that having one of them is useful. Open it up, flatten it > out, and save it for use as a template for cutting sleeves out of 150 grit > sandpaper. > > Kent Swafford >
This PTG archive page provided courtesy of Moy Piano Service, LLC