Phil Get yourself a 2"china bristle paint brush (nylon bristles will fray). Fire up your favorite vacuum. While holding its hose near, brush vigorously through the tuning pins following the diagonal rows. This can be done around the bridge pins, aliquots, hitch pins, etc., where a rag can't reach. Paul Chick ----- Original Message ----- From: Phil Bondi <tito@PhilBondi.com> To: <pianotech@ptg.org> Sent: Monday, June 18, 2001 5:58 PM Subject: Re: vacuums almost seems fruitless to get the > soundboard clean again and not have a method to get the 'nasties' from out > of the tuning pin area. > > any thoughts? > > roo(k) >
This PTG archive page provided courtesy of Moy Piano Service, LLC